News

Spring depressor for seat belt retracto part 1

1、The coil spring pin pressing machine for the seat belt retractor is characterized in that it includes a base, and a lower placing plate is arranged on the base, and...

Regulation 16.08 Consolidated to Supplement 3 P...

1.1. DESCRIPTION OF THE MANIKIN   1.1.1. Structure of the lower leg (see Figures 3 and 4) The structure of the lower leg consists of three components: A sole plate (30); A shin tube (29);...

Regulation 16.08 Consolidated to Supplement 3 P...

Model B (See paragraph 5.2.5. of this Regulation) The above approval mark affixed to a vehicle shows that the vehicle type concerned has been approved in the Netherlands (E 4)...

Regulation 16.08 Consolidated to Supplement 3 P...

11.3. Confirmation or refusal of approval, specifying the alterations, shall be communicated by the procedure specified in paragraph 5.2.3. or 5.3.3. of this Regulation to the Parties to the Agreement applying...

Regulation 16.08 Consolidated to Supplement 3 P...

8.1.8.2 Every passenger seating position which is fitted with a frontal protection airbag shall be provided with a warning against the use of a rearward-facing child restraint in that seating...

Regulation 16.08 Consolidated to Supplement 3 P...

7.5.5. Buckles having parts common to two safety-belts shall be loaded in such a way as to simulate the conditions of use in the vehicle with seats in the mid position...