Wenzhou Far Europe Automobile Safety System Co., Ltd SALES MANAGER：Dora Deng SKYPE: fareurope6 SALES 1:+86-577-66613700 SALES 2:+86-577-66613711 ADD：Rm 601-602, Building 5, Wanyang Innovation City, No. 16-22, Xinyang Road,Binhai New District, Pingyang, Wenzhou City, Zhejiang Province
Emergency Locking Function Safety Belt is a safety device of a vehicle for securing its occupants against harm that might come. During a sudden stop or a collision, the driver has to endure a lot of damage. This mechanism is created specifically for such circumstances.
The function of a Emergency Locking Function Safety Belt is to decrease the possibility of death or a serious injury in the collision of a car by decreasing the force of impacts. It keeps the occupants safe by making sure that in a collision, the positioning of an occupant remains the same. When it is equipped properly, it proves to be quite effective in saving the life of driver.
Sometimes, the driver has to eject from the car when the vehicle rolls over. In such circumstances, Emergency Locking Function Safety Belt is there to save the driver.
FEB003 Emergency Locking Function Safety Belt Product Specifications:
Item Name:
Three Point ELR Seat Belt
Item No.:
FEB003
Normal Colour:
Black/Grey/Beidge
Webbing Material:
Polyester
Fixing Type:
3 points
Webbing Size :
47X1.15mm
Total Length:
2600mm
Application:
For most car
M.O.Q.:
50 pcs
Packing:
Neutral packing or customer required
Delivery Time:
20 Days against order confirmation
Shipment:
Express
Nearest Port:
Ningbo/Shanghai Port
Belts with Emergency Locking Retractors
These must be installed & fixed at their intended design angle. They allow freedom of movement & lock in
an emergency. To check Belts with Emergency Locking Retractors: tug sharply on webbing and
observe that the retractor locks.
These instructions should be passed to the owner / driver.
A belt is designed to be used by only one person and not around a child seated on a passengers lap.
It is important to wear the belt on each journey.
It is not intended for children under 4 years old unless used with an appropriate restraint.
The belt should at all times be adjusted and used in accordance with the instructions and
should be a snug fit.
Webbing must not be allowed to chafe against sharp edges.
Avoid twisting webbing.
Do not make alterations or additions to the belt. If in doubt consult the manufacturer.
Belts that have been cut, frayed, damaged or used in an accident should be replaced.
After an impact the belt & anchorages should be checked.
To clean use warm soapy water only. Do not use chemical cleaners, bleach or dye.
Contamination with petrol, grease and acid will be detrimental.
Static belts should be stowed when not in use, to avoid damage.
